REVE D MC1 REAR A-ARM CONVERSION SET (M1-RAC)
Introducing the rear A-arm conversion set for the MC-1!
This conversion set enables total setup freedom for the rear end!
Track width, camber angle, caster angle, roll center and lastly it's possible to fine tune the toe and the bump toe angle change throughout the suspension stroke.
You can try various settings according to the road surface conditions, layout of the course and driving style.
Please try the rear A arm conversion set that brings out the monster performance of the MC-1 even more!
・ Alu. Rear Lower Arm (1pc each for left and right)
・ Alu. Rear Lower Arm Plate (2pcs)
・ Alu .Rear Upper Arm (Built-in ball bearing, 1pc each for left and right)
・ Alu. Rear Upper Arm Mount (1pc each for left and right)
・ Alu. Rear Knuckle (2pcs)
・ Alu. Rear Knuckle Plate (2pcs)
・ Alu. Suspension Mount RF type # 3 (1pc)
・ Alu. Suspension Mount # 3 (1pc)
・ High Rigidity Upper Arm Pins (2pcs)
・ Lightweight POM Spacers (0.5mm thickness x 4 pcs, 1.0mm thickness x 4 pcs, 2.0mm thickness x 2 pcs)
・ Alu. Thin M3 Nylon nut (2pcs)
・ Turnbuckles M3 / M4 16mm (2pcs)
・ Turnbuckles M3 / M4 24mm (2pcs)
・ Alu. Spacers (φ3 × φ6 × 0.5mm) (2pcs)
・ Alu. Spacers (φ3 × φ6 × 2.0mm) (
4pcs )・ Alu. Spacers (φ3 × φ6 × 3.0mm) ) (
6pcs )・ M2 × 5mm Cap Screws (2pcs)
・ M2 × 8mm Cap Screws (4pcs)
・ Molded Ball Caps (1pc)
・ Molded Suspension Mount Bushings (2pc)
・ Assembly Instructions (1sheet)
・ Development View / Parts List ( 1sheet)
Note: Requires Chassis with Reve D MC-1 Conversion installed.